How to Overcome Flash Disk Requests Format Without Losing Data

How do I fix the flash drive asking for format? Flash is a very flexible storage medium.

You can take it anywhere because it does not require a large place or space to store it. In fact, you can simply keep it in your pocket.

Many people use flash drives, ranging from students, students, teachers to office workers. For the current flash capacity, it varies.

Not only that, the shape is also more concise which further increases the practical value of the storage media.

The various conveniences offered by the flash drive make it more and more needed by people. However, sometimes there are problems with the flash.

One of them is a flash that suddenly asks to be formatted or write protected. You experience this condition when you plug the flash drive into your laptop or computer.

Then a notification appears that you are asked to format the flash. Therefore you have to overcome the flash request format in various ways.

Imagine if it turns out that in the flash there is a lot of important data that you haven’t moved to the laptop.

This condition of course makes you frustrated. But don’t worry because we will provide a solution to overcome the flash request format below.

The Cause of the Flash Disk Request Format

Before knowing the steps to solve the flash drive asking to format, you need to know what causes this problem to occur.

Unrecognized File System

The first reason why the flash drive asks to be formatted is because there are system files that are not recognized.

That is, the flash has a system format that is not recognized by a laptop or PC. This is usually closely related to the operating system used.

In general, the Windows operating system supports 3 types of formats, namely NTFS, FAT32, and also exFAT (a version higher than FAT32).

Maybe you’ve lent your flash drive and then plugged it into a device that uses the Linux operating system.

It could be that at that time you have formatted the flash drive to ext2 or ext3 which is compatible with the Linux OS.

So, when you plug it into a device that uses Windows OS, a problem occurs, that is, your flash drive asks to be formatted.

Interrupted File Processing

File processing processes such as transferring or storing files are interrupted. This can result in the loss of data from the file, which can even become corrupt.

For certain cases, a computer or laptop that turns off suddenly while transferring data to a flash drive will cause the system on the flash to turn into RAW.

This condition also occurs when the flash is suddenly removed. Simple things like this can actually have a big impact and harm you because the flash drive asks for formatting.

When you access the flash drive by right clicking and selecting Propertiesthen you will see that the capacity of the flash drive becomes 0.

Virus

Viruses are also the cause of the flash can not be detected. It is possible that your flash drive has been infected with a virus and you must deal with it immediately.

You can scan your flash drive using a trusted antivirus application.

Damage to Flashdisk

Damage that occurs on the flash drive, of course, makes the flash drive experience problems. There are many problems you can run into.

One of them is a flash that is not detected or a flash that asks to be formatted.

Then you have to repair the components contained in the flash so that the flash can be used as before.

Solution to Overcome Flash Disk Request Format

In our opinion, there are five ways to overcome the flash drive asking for a powerful format, including:

Plug the Flashdisk into Another Port

The first way to solve the flash request for formatting is to try plugging it into another port.

The ability of a laptop or PC to detect USB is determined by the driver. So, when your flash drive asks to be formatted, there may be a problem with the driver installation.

This makes one of these ports detect your flash drive as RAW.

Therefore, you can try plugging your flash drive into another port. If this method doesn’t work, then try another method.

Restarting PC or Laptop

When your flash is plugged into a device that has been on for a long time, there may be an error on the system side.

This condition makes it difficult for your PC or laptop to detect the flash.

In addition, the device used for a long time may contain temporary files or temporary files that affect the performance of the device.

This condition may have an impact on the flash that asks for format when you plug it into the USB port.

Therefore, you can try restarting your device. When the process restarts, the files contained in RAM will automatically disappear and your device will return to normal condition.

Plug the Flashdisk into Another Device

You can also fix the flash drive asking for format without losing data by plugging it into another device.

This is to find out whether the problems that have occurred so far have been caused by the computer or laptop you are using or are caused by the flash itself.

So, when you plug it into the device and it works, it’s likely that the problem lies with the previous device you used to detect the flash drive.

On the other hand, if it turns out that the flash drive is still asking to be formatted, then most likely this problem comes from your flash.

Therefore, you can try this simple method to find out whether the flash can be detected or not.

Fix Via CMD

If the three methods above still don’t work to fix the flash disk asking for format, you can still try to fix the flash disk asking for format with the following cmd.

The way you do it is to repair via Command Prompt. You can type the command chkdsk to check the integration on the flash system file system.

The steps are as follows:

  • Please log in to CMD. You can type it in search Start Menu.
  • Once on the Command Prompt page, pay attention to changing the letters “C” to the letter where your pendrive is located. Usually in the letters “C”.
  • If the flash drive location is in the letter F, You have to move from C ke F by typing the command F: then Enter.
  • The next step, please type the command chkdsk d:/f then press Enter.
    cmd chkdsk
  • Wait a while until CMD finishes its task and the flash repair process has been completed.

Now you can check the condition of your flash drive by plugging it back into the USB port on your laptop or PC.

Now your flash should be working normally again.

Doing Low Level Format

The next way to overcome the flash request format is with Low Level Format.

This method is fairly easy even if you have never tried it. For the steps are as below.

  • The first step, connect the flash and then press the button Windows + R.
  • The second step, you press diskmgmt.msc then press or click OK.
  • The third step, select on the Storage and right click on the flash. Then select Format.
    disk management
  • Follow the instructions listed and wait a while until the formatting process is complete.

Those are some things related to the causes and how to deal with the flash asking for continuous formatting. may be useful.

Leave a Comment